20 December 2011 - Automated analyzer of cold filter plugging point of diesel and heating fuels LOIP LP-6371A

Automated analyzer LOIP LP-6371A is designed for the determination of cold filter plugging point of diesel and heating fuels according to ASTM D 6371, EN 116 and similar standards.

Features and benefits:

• Microprocessor controller for fully automated measurements;
• Optical measuring system of sample filtering time;
• PT 100 probe in glass casing to emulate the glass thermometer readings;
• Build-in cooling system. The hot side of the cooling cells needs to be cooled by external chiller;
• Build-in programmable vacuum pump;
• Large graphic LCD touch screen display to control the instrument;
• Build-in memory to store the measurement results;
• Direct setting of the bath temperature to fast start of the plugging point determination;
• Cooling system overheat warning to detect external chiller malfunctioning;
• Programmable filter cleaning;
• Connection to PC via Ethernet port.

Specifications:

Specimen volume: 45ml

Measuring range: from room temperature to -60 ºC

Temperature control: by step (-34 ºC, -51 ºC and -67 ºC) or linear. The linear cooling rate can be programmed

External chiller temperature: +15 ºC (for -34 ºC bath temperature), -15 ºC (for -51 ºC bath temperature), -40 ºC (for -67 ºC bath temperature)

Build-in memory: up to 1000 data sets

Power consumption: 400 W

Mains supply: 200...240 V, 50 Hz

Overall dimensions: 440х305х400 mm

Weight: 15 kg

• Вернуться к списку новостей